无锡科达移动脚手架厂家【官网】生产:【移动脚手架】【门式脚手架】【梯形脚手架

无锡科达脚手架生产厂家

示例图片三
网站首页 > 新闻资讯 > 时事新闻

解析离心风机的维护要点有哪些呢?

2018-12-24 14:39:21 无锡科达脚手架生产厂家 阅读

需要做到的就是离心风机在运行中需压迫保持风道的畅通,离心风机在风量很小时功率会超载,注意不要在密封而补风不足的环境或阀门全关闭时长期使用。最佳情况应对电流进行定期监控。2.在离心风机使用前一定要对风机进行必须的试机,这个过程是为了保证风机没有故障的运行,使得风机的有效性得到最大程度的保障。

What we need to do is to press the centrifugal fan to keep the airway unblocked in operation. The power of the centrifugal fan will be overloaded when the air volume is very small. We should pay attention not to use the centrifugal fan for a long time in the sealed and insufficient air supply environment or when the valve is completely closed. In the best case, the current should be monitored regularly. 2. Before the centrifugal fan is used, it is necessary to test the fan. This process is to ensure that the fan runs without fault, so that the effectiveness of the fan can be guaranteed to the greatest extent.

3.如果风机长时间没有使用,又再次利用时,一定要先检查风机各个部件是否还是依旧的牢固,一旦发现有什么地方出现松懈的现象,一定要及时的紧固,这样在风机试运行时,就不会因为风机组件的松动造成风机不能正常的使用了。

3. If the fan has not been used for a long time and is reused, we must first check whether the various components of the fan are still solid. Once we find any looseness, we must tighten it in time. In this way, when the fan is in trial operation, the fan will not be used normally because of the loosening of the fan components.

4,风机启动前必需检查离心风机及管道内有元妨碍转动的物品,如有则应清除后方可启动。

4. Before starting the fan, it is necessary to inspect the centrifugal fan and the articles in the pipeline that hinder rotation. If so, it should be cleared before starting.

5.风机在调试完毕没有发现问题之后要谨慎的投入使用,而且要定时的观察离心风机的每一个反映,一旦发现异常,要立即停机检查。

5. Fans should be put into use cautiously after debugging has not found any problems, and every reflection of centrifugal fans should be observed regularly. Once abnormalities are found, they should be stopped immediately for inspection. 

辛苦整理!转载请注明来自 http://www.wxmlfj.com/faq/2101.html



标签:   脚手架 离心风机 脚手架厂家 梯形脚手架 门式脚手架 移动脚手架