无锡科达移动脚手架厂家【官网】生产:【移动脚手架】【门式脚手架】【梯形脚手架

无锡科达脚手架生产厂家

示例图片三
网站首页 > 新闻资讯 > 时事新闻

高压离心风机获取用户信任的优势是什么呢?

2018-12-24 14:39:58 无锡科达脚手架生产厂家 阅读

高压离心风机本身所具备的一机两用的特点是很多风机所不能具备的,它可以用来吸气,也可以用来吹风,高压离心风机不需要很多油或者少油都可以运转,而且输出来的空气是干净的。相对于离心风机和中压离心风机来说,其压力高很多,往往是离心风机的十几倍以上,这些优势对于用户来说是非常重要的。

High-pressure centrifugal fan itself has a dual-purpose feature that many fans can not have, it can be used to breathe, can also be used to blow, high-pressure centrifugal fan does not need a lot of oil or less oil can operate, and the output air is clean. Compared with centrifugal fan and medium-pressure centrifugal fan, its pressure is much higher, often more than ten times of centrifugal fan. These advantages are very important for users.

如果泵体是整体压铸,并且使用了防震安装脚座,那么它对安装基础的要求也是很低的,甚至可以不用固定脚座即可正常运转,非常的方便,也非常的节省安装费用和安装周期;高压风机的构造不会很复杂,它的损耗件仅仅是两个轴承,在质保期之内,基本上不需要维护,它的这种免维护功能对于用户来说是非常实用的,能减轻很多的作用时间。

If the pump body is die-cast as a whole and the shockproof mounting pedestal is used, the requirement for the mounting foundation is also very low. It can even operate normally without the fixed pedestal, which is very convenient and saves installation cost and installation cycle. The structure of the high-pressure fan is not very complicated, and its loss parts are only two bearings, which are basically not needed during the quality guarantee period. To maintain, this maintenance-free function is very practical for users and can reduce a lot of time.

高压离心风机的机械磨损非常微小,因为除了轴承之外,没其它的机械接触部分,只要是处于正常的使用条件下,3~5年是完全没有问题的,所以高压风机的使用寿命也是吸引用户的最大原因,这也就直接的降低了用户重新选择离心风机的成本。

The mechanical wear of high-pressure centrifugal fan is very small, because there is no other mechanical contact part besides bearings. As long as it is in normal service conditions, 3-5 years is no problem, so the service life of high-pressure fan is also the biggest reason to attract users, which directly reduces the cost of users're-selection of centrifugal fan. 

辛苦整理!转载请注明来自 http://www.wxmlfj.com/faq/2100.html



标签:   脚手架 离心风机 脚手架厂家 梯形脚手架 门式脚手架 移动脚手架